Search Results

Misfire and cycle-to-cycle combustion variation are both serious problems in securing good engine performance and low exhaust emissions in the case of using extremely lean mixtures. Making some modifications in the ignition system and in the combustion chamber, and increasing the mixture turbulence, we examined their effects upon the lean limit, the engine performance, and the exhaust emissions. It was found that gap width and gap projection of a spark plug and spark energy as well as mixture turbulence had a great effect on extending the lean limit and improving engine performance with lean mixtures. A compact combustion chamber is preferable for lean mixture operation. Smooth operation of the engine can be maintained even at retarded spark timing by applying the above-mentioned items and providing hot intake air to the engine. Consequently, exhaust emissions, including hydrocarbons and oxides of nitrogen, can be substantially reduced.

Earlier work has demonstrated that exhaust gas recirculation (EGR) decreases peak combustion temperature and thus reduces the concentration of nitrogen oxides (NOx) in spark ignition engine exhaust. The present authors hypothesized that NOx formation is primarily affected by the heat capacity of the combustion gases and recycled exhaust. The hypothesis was tested in an experimental program involving the admission of inert gases such as He, Ar, H2, and CO2, and water in place of EGR. In addition to confirming the validity of the original hypothesis, the test data also indicated that engine output and efficiency were significantly affected by the heat capacity of the combustion gases. The authors conclude that EGR functions by increasing the heat capacity of the working fluid, and demonstrates that the correlative changes in NOx and engine performance can be predicted from heat capacity considerations.

Three Japanese automobile manufacturers-Mitsubishi Motors Corp., Nissan Motor Co., Ltd., and Toyo Kogyo Co., Ltd.-have been making efforts over the past three years to design and develop effective thermal reactor-exhaust gas recirculation and catalytic converter systems suitable for small engines. The work is being done by members participating in the IIEC (Inter-Industry Emission Control) Program, and the exhaust emission levels of the concept vehicles developed by these companies have met the goal established by the IIEC Program at low mileage. Each system, however, has a characteristic relationship between exhaust emission level and loss of fuel economy. Much investigation is required, particularly with respect to durability, before any system that will fully satisfy all service requirements can be completed. This paper reports the progress of research and development of the individual concept vehicles.

Since the motor vehicle is controlled by the driver, dynamic consideration of the driver-vehicle system is necessary. In this sytem, eye sight is the most important sense with which the driver gets information from the course. In the present research, first, sighting distance in steady straight running was measured by the “slit method”. Next, sighting distance and sighting angle in various curvilinear runnings were measured by use of a “sight point camera” devised by the authors. Introducing the conception of sighting distance and sighting angle, dynamics of the driver-vehicle system is contrived. Theoretical calculation showed that sighting distance should be longer than a certain critical value to make the system stable.